| Customization: | Available |
|---|---|
| Material: | Stainless Steel Inner and Outer Ring |
| Application: | Flanges |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Graphite/PTFE/Mica Filler Spiral Wound Gasket with Epoxy/Zinc Coating
A Graphite/PTFE/Mica Filler Spiral Wound Gasket is a type of gasket that combines the strength and durability of a spiral wound gasket with the chemical resistance and non-stick properties of PTFE. It is commonly used in high-temperature and high-pressure applications where a reliable seal is essential.
The Graphite,PTFE,Mica Filler Spiral Wound Gasket is made by spirally winding a thin strip of metal, typically stainless steel, around a center filler material made from PTFE. The metal strip provides strength and stability, while the PTFE filler material provides chemical resistance and non-stick properties. The result is a gasket that is both durable and resistant to a wide range of chemicals and fluids.
One of the key benefits of the Graphite,PTFE,Mica Filler Spiral Wound Gasket is its ability to create a seal that is virtually leak-proof. This is achieved by the design of the gasket, which allows it to conform to the irregularities of the flange surfaces, creating a tight and secure seal. The PTFE filler material also ensures that the gasket remains non-stick, making it easy to remove and replace when necessary.
Another advantage of the Graphite,PTFE,Mica Filler Spiral Wound Gasket is its ability to withstand high temperatures and pressures. This makes it ideal for use in applications such as petrochemical processing, where extreme conditions are common. The gasket is also resistant to most chemicals, ensuring that it remains functional even in harsh environments.
Installation of the Graphite,PTFE,Mica Filler Spiral Wound Gasket requires special attention to ensure that it is installed correctly. The flange surfaces must be clean and free of any debris or contaminants that could compromise the seal. Additionally, proper torque values must be applied to the bolts to ensure that the gasket is compressed evenly.
In conclusion, the Graphite,PTFE,Mica Filler Spiral Wound Gasket is a reliable and durable sealing solution that is widely used in high-temperature and high-pressure applications. Its ability to withstand extreme conditions, resistance to chemicals, and non-stick properties make it a popular choice among engineers and technicians in the petrochemical industry.
Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
Outer Ring TypeSolid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
Inner & Outer Rings TypeA inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
Typical Applications
Pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. Petrochemical, chemical, mechanical manufacturer, power station, metallurgy, shipbuilding, medical and pharmaceutical unclear power station and navigation, etc.
Spiral Wound gaskets, ASME B16.20 Metal Gasket,Marking
Why choose Qishine?
Who choose Qishine?
About Sample
){kind=link}