Secured Trading Service

AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut

  • Audited Supplier
  • 8 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • Superior Corrosion Resistance: Resists oxidation, carburization, and aggressive chemicals like acids and salts.
  • Customizable Lengths: Standard range 20mm-500mm with custom lengths available upon request.
  • Custom Surface Treatment: Options include passivation, electropolishing, and PTFE coating for specific needs.
  • Comprehensive Quality Testing: Includes dimensional checks, mechanical testing, and surface inspection per batch.
  • Mill Test Certificates Available: MTC or MTR compliant with EN.10204.3.1 standards provided upon request.
  • Global Shipping Capability: Experienced in worldwide delivery via air, sea, or express couriers like DHL and FedEx.

Shipping

Shipping Cost:
Contact the supplier about freight and estimated delivery time.

Online Trading Protection

Payment Guarantee
T/T PayPal ApplePay GooglePay visa mastercard american express discover JCB diners club PIX SPEI OXXO PSE OZOW Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Clearer shipment tracking with platform-supported logistics.
Inspection Service
Optional pre-shipment inspection for quality and quantity checks.
After-Sales & Dispute Handling
Platform-assisted dispute resolution, including refunds or returns when applicable.

Only orders placed and paid through Made-in-China.com Secured Trading are eligible for payment protection and the corresponding platform services.

Product Images of AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut

AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut pictures & photos
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut pictures & photos
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut pictures & photos
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut pictures & photos
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut pictures & photos
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut pictures & photos
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
  • AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
  • AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
    AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
  • AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
    AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
  • AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
    AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
  • AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
    AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
  • AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
    AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
  • AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
    AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut

Find Similar Products

Product Description

ASTM A453 Grade 660 (A286) High Temperature Stud Bolt with Hex Nuts

Chemical CompositionPressure RatingsKey Features660 or Incoloy 901ThreadsSelection GuideQuality & DocumentationFAQCompany Profile

Grade 660 is the A286 alloy under the bolting specification: UNS S66286, X6NiCrTiMoVB25-15-2, EN 1.4980. Titanium and aluminium precipitation harden it, it keeps its strength to about 650 °C, and - the reason it is chosen on stainless flanges - its thermal expansion is close to that of 304 and 316, so the bolt does not lose preload when the flange grows.

Supplied as full thread studs to ASME B18.31.2 with two heavy hex nuts of the same grade. Sizes 1/2 to 4 Inch, lengths 20 to 500 mm as standard, longer to drawing. Class A is our standard supply; Class B, C and D are available against a stated requirement.

Item Value
Grade ASTM A453 Grade 660 / UNS S66286 / A286 / EN 1.4980
Class A as standard; B, C and D on request
Product Full thread stud bolt with two heavy hex nuts
Size 1/2 to 4 Inch
Length 20 to 500 mm standard, longer to drawing
Thread UNC, 8UN, UNF; metric on request
Standard ASME B18.31.2 (stud), ASME B18.2.2 (nut)
Condition Solution treated and aged
Service temperature 650 °C
Finish Plain passivated, electropolished, PTFE coated
Certificate EN 10204 3.1
Packing Plywood case

└ Stud bolt with heavy hex nuts, A453 Grade 660.

Chemical Composition

Element Composition (%)
Ni 24.0 - 27.0
Cr 13.5 - 16.0
Mo 1.00 - 1.50
Ti 1.90 - 2.35
Al 0.35 max
V 0.10 - 0.50
B 0.001 - 0.010
C 0.08 max
Mn 2.00 max
Si 1.00 max
P 0.025 max
S 0.015 max
Fe Balance

Titanium plus aluminium form the gamma prime phase. Vanadium and boron are there for creep strength at temperature, which is why a 304 or 316 substitute does not work in this service.

AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut

Classes

Class Heat treatment Position
A Solution treated and aged Highest room temperature strength; the class we quote for general flange bolting
B Higher solution temperature, then aged Better stress rupture life; hot section bolting
C Solution treated only Customer ages after machining; a special order
D Alternate solution treatment Sour service and low temperature impact requirements; hardness controlled

The class has to be stated on the order, because the heat treatment and therefore the certified properties differ. A certificate that does not name the class cannot be checked against A453.

└ Stud bolts, nuts and washers supplied as one set.

└ Chamfered end and thread run-out.

Why It Goes on Stainless Flanges

Material Expansion coefficient, 10-6/°C
A193 B7 (Cr-Mo steel) 12.0
A193 B16 (Cr-Mo-V steel) 12.0
A453 Grade 660 (A286) 16.0
304 / 316 flange 17.0

At 400 °C a stainless flange grows faster than a B7 bolt. The flange moves away from the nut, the bolt load drops, the gasket relaxes and the joint leaks - without anything being wrong with the bolt. Grade 660 expands with the flange, so the load is kept. This is the single most common reason the grade is specified, and it is why 660 is paired with 304 or 316 flanges rather than with carbon steel ones.

AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut

660 or Incoloy 901

Item A453 Grade 660 (A286) Incoloy 901
Room temperature strength 895 MPa min tensile 1,034 MPa tensile, 689 MPa yield
Expansion against a stainless flange Close match Lower than 660
Strength at 600 to 650 °C Good Higher creep strength
Typical use Stainless flange bolting, general high temperature Heavy sections, gas turbine and reformer hardware
Availability and cost Widely stocked, lower cost Narrower supply, higher cost

If the flange is stainless and the joint is movement controlled, use 660. If the joint is load controlled at the top of the temperature range and the flange is steel, 901 carries more load.

└ Rolled thread surface finish.

Galling and Assembly

  • Never assemble dry. Use a nickel or MoS2 based anti-seize on the thread and under the nut bearing face.
  • Tighten slowly and continuously. A high speed impact wrench heats the thread and picks up metal.
  • Match the nut grade to the stud, so both expand at the same rate.
  • Re-check torque after the first heat cycle, when the joint has reached operating temperature and cooled.
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut

How to Specify

A complete line for quotation reads:

Stud bolt, ASTM A453 Grade 660 Class A, 1 Inch - 8UN x 220 mm, ASME B18.31.2, solution treated and aged, PTFE coated, with 2 heavy hex nuts, EN 10204 3.1

  • Grade and class: A, B, C or D
  • Diameter, thread series and length
  • Standard and thread class
  • Coating, and whether nuts and washers are included
  • Any stress rupture or elevated temperature test required

└ Dimension check with caliper before packing.

└ Magnetic particle inspection.

└ Spectrometer chemical analysis.

Documentation and Traceability

Mill certificate to EN 10204 3.1 with heat number, chemical analysis and mechanical results; hardness report for the nuts; dimensional report; stress rupture test to ASTM E139 on request.

└ ISO 9001 quality management system certificate.

FAQ

Short answers to what buyers ask before the first order. Anything not covered here is answered with the quotation.

Question Answer
What is the minimum order? One piece for standard sizes; non-standard lengths are quoted from drawing.
How long does delivery take? 7 to 35 days from confirmation of size, class, finish and quantity.
Class A or Class B? Both are supplied; state the class on the order.
Are the nuts supplied with the studs? Yes. Heavy hex nuts are matched to the studs and hardness is reported.
What documents are supplied? Mill certificate to EN 10204 3.1 with heat number, chemical and mechanical results, nut hardness report; stress rupture to ASTM E139 on request.
How is the order packed? Plywood case.

└ Send size, grade, quantity and destination port with your enquiry for a firm price and lead time.

About the Manufacturer

Xiamen Qishine Industry Co., Ltd. has supplied piping and sealing components since 2013. The range covers gaskets, fasteners, flanges, fittings, valves, pipes and piping spare parts, supplied mainly to oil and gas, petroleum, marine, oilfield, mining and heavy industrial projects, with pipeline construction and maintenance as the main focus.

Most of our work is for EPC contractors and project owners. We quote against the piping class or datasheet you send, produce to the nominated standard, inspect before packing, and ship with mill and inspection certificates. Where one joint needs several items - gasket, studs, nuts, washers - they are supplied as one matched set, so thread fit and hardness pairing are already checked when the crate is opened.

Send the standard, size, pressure class and medium, and we will confirm the grade and the lead time.

AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut
AISI 660 High Temperature Corrosion Resistant Stud Bolt with Hex Nut

The company operates an ISO 9001 certified quality management system, and the certificate is shown above.

About the Supplier

This supplier has been audited by TÜV Rheinland. Verify the report on the official TÜV Rheinland website with ID "MIC-ASR247255". Items marked "verified" are certified.

Watch Video
Watch Video
Xiamen Qishine Industry Co., Ltd.
Xiamen Qishine Industry Co., Ltd.
Xiamen Qishine Industry Co., Ltd.
Xiamen Qishine Industry Co., Ltd.
Xiamen Qishine Industry Co., Ltd.
Xiamen Qishine Industry Co., Ltd.
Xiamen Qishine Industry Co., Ltd.
Xiamen Qishine Industry Co., Ltd.

About Our Factory & Business Background

Address
318 Houhang Qianshe, Huli District, Xiamen, Fujian, China
verified Registered Capital
10,000,000 RMB
verified Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment
verified International Commercial Terms(Incoterms)
FOB, CIF, CFR, EXW
verified Average Lead Time
Peak Season Lead Time: one month
Off Season Lead Time: one month
verified Nearest Port
Xiamen Port
verified Minimum Order Quantity
1
verified Supply Chain Partners
6

Our Production Capability & Technical Expertise

verified Main Products
Fastener, Gasket, Flange
verified Customization Options
Customization from Samples
verified OEM Service Available
Yes
verified R&D Engineers
1 people

Our Industry Experience & Global Business Record

verified Year of Establishment
2013-11-18
verified Export Year
11 Years
verified Main Markets
North America, South America, Europe
verified Repeat Buyers Choice
30%~50%
verified Number of Foreign Trading Staff
4
verified Overseas Agent/Branch
No
verified New Products Launched in Last year
No

Our Certifications, Standards & Industry Recognition

verified Management System Certification
ISO9001:2015

FAQ

What's the lead time for orders?
The specific lead time depends on the order quantity and current production schedule. We shall provide an exact timetable upon order confirmation.
Do you provide samples?
Yes, free samples are available. You only need to pay the shipping cost.
How do you ensure quality?
We conduct strict inspections and can provide Mill Test Certificates (MTC) upon request.
How do I place an order?
Contact us via email/phone for a quote, then confirm with a PO.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now