Customization: | Available |
---|---|
Material: | Stainless Steel Inner and Outer Ring |
Application: | Flanges |
Still deciding? Get samples of US$ 5/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
ASME/EN/JIS/DIN/BS/ANSI 3 Inch 150LB Spiral Wound Gasket
The ASME/EN/JIS/DIN/BS/ANSI 3 Inch 150LB Spiral Wound Gasket is a type of gasket that is designed to be used in high-pressure and high-temperature applications. This gasket is typically used in applications such as petrochemical processing, oil and gas, and power generation where the sealing requirements are critical.
The ASME,EN,JIS,DIN,BS,ANSI 3 Inch 150LB Spiral Wound Gasket is constructed using a combination of materials that provide the necessary strength and flexibility for the gasket to withstand high-pressure and high-temperature environments. The gasket is made up of a spiral wound metallic strip with a filler material, typically made of graphite or PTFE, wound between the layers of the metallic strip.
The metallic strip used in the ASME,EN,JIS,DIN,BS,ANSI 3 Inch 150LB Spiral Wound Gasket is typically made of stainless steel or other alloys that can withstand high-temperature and high-pressure environments. The filler material is designed to provide additional compressibility and sealing properties to the gasket. The combination of these materials creates a gasket that is capable of providing a reliable and durable seal in even the most extreme environments.
The ASME,EN,JIS,DIN,BS,ANSI 3 Inch 150LB Spiral Wound Gasket is designed to meet the requirements of the ASME B16.20 standard. This standard specifies the requirements for metallic gaskets used in flanged joints for piping systems. The gasket is specifically designed to meet the requirements for Class 150 flanges and is 3 inches in diameter.
Installation of the ASME,EN,JIS,DIN,BS,ANSI 3 Inch 150LB Spiral Wound Gasket requires special attention to ensure that it is installed correctly. The gasket should be installed between two flanges with the metallic strip facing inward toward the center of the flange. The flanges must be aligned properly, and the bolts must be tightened evenly to ensure that the gasket is compressed evenly.
In conclusion, the ASME,EN,JIS,DIN,BS,ANSI 3 Inch 150LB Spiral Wound Gasket is a reliable and durable sealing solution that is widely used in high-pressure and high-temperature applications. Its ability to withstand extreme conditions, resistance to chemical and fluid attack, and compliance with industry standards make it a popular choice among engineers and technicians in the petrochemical, oil and gas, and power generation industries.
Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
Typical Applications
Pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. Petrochemical, chemical, mechanical manufacturer, power station, metallurgy, shipbuilding, medical and pharmaceutical unclear power station and navigation, etc.
Spiral Wound gaskets, ASME B16.20 Metal Gasket,Marking
Ring & Strip Materials | ||||||
Minimum | Maximum | GuideRing Color Code | ||||
Material | F | C | F | C | Abberviation | |
SS 304 | -320 | -195 | 1400 | 760 | 304 | Yellow |
SS 316L | -150 | -100 | 1400 | 760 | 316L | Green |
SS 347L | -150 | -100 | 1400 | 760 | 317L | Maroon |
SS 321 | -320 | -195 | 1400 | 760 | 321 | Turquoise |
SS347 | -320 | -195 | 1700 | 925 | 347 | Blue |
Carbon Steel | -40 | -40 | 1000 | 540 | CRS | Silver |
Alloy 20 | -300 | -185 | 1400 | 760 | A-20 | Black |
Hastelloy B3 | -300 | -185 | 2000 | 1090 | HASTB | Brown |
Hastelloy C276 | -300 | -185 | 2000 | 1090 | HASTC | Belge |
Incoloy 800 | -150 | -100 | 1600 | 870 | IN 800 | White |
Incoloy 825 | -150 | -100 | 1600 | 870 | IN 825 | White |
Inconel 600 | -150 | -100 | 2000 | 1090 | INC 600 | Gold |
Inconel 625 | -150 | -100 | 2000 | 1090 | INCO 625 | Gold |
Inconel X750 | -150 | -100 | 2000 | 1090 | INX | No Color |
Monel 400 | -200 | -130 | 1500 | 820 | MON | Orange |
Nickel 200 | -320 | -195 | 1400 | 760 | NI | Red |
Titanium | -320 | -195 | 2000 | 1090 | TI | Puple |
Why choose Qishine?
Who choose Qishine?
About Sample